Troubleshooting
Why Do Flat Parts Stick Together During Mass Finishing?
A stuck stack is a media-access problem, not simply a cycle-time problem. Separate the causes, test one change at a time and inspect the hidden surfaces.
Read →
Too Much Foam in Wet Mass Finishing? Check the Process Before Adding Defoamer
Foam is a troubleshooting clue, not a diagnosis. Compare the current process with the last good batch before adding defoamer or changing the cycle.
Read →
Why Are Parts Getting Dings During Mass Finishing?
A burr-free part can still fail inspection. Find where new marks appear and decide whether loose-batch finishing fits the surfaces you need to protect.
Read →
Tumbling Media Stuck in Holes? Check Fit, Wear, and Separation
A media choice has to reach the burr and come back out. Use this fit, wear, and separation checklist before changing the size in your machine.
Read →
Your Deburring Machine Just Failed. Here Is What You Can Do This Week.
Lock it out, protect the parts, keep orders moving, and qualify a replacement on real parts, all inside a week. Richwood keeps centrifugal barrel finishing machines in stock in Los Angeles and ships in about one week, not 90 days.
Read →