Centrifugal Barrel vs Centrifugal Disc Finishing: Which One Fits Your Parts?
Both are high-energy processes. A barrel is a sealed batch machine with the highest force and the most control. A disc is an open bowl that loads fast and suits large volumes of small, tough parts. Here is how to choose.
Read →
Deburring Firearms Magazines and Ammunition Components with Centrifugal Barrel Finishing
Feed lips, followers, floor plates, and guide rails need a burr-free edge on every unit or the magazine fails under fire. Centrifugal barrel finishing gives the same isotropic edge on the ten thousandth part as the first. Here is how the process is set up.
Read →
Finishing 3D-Printed Metal Parts: Removing Layer Lines and Support Marks in a Centrifugal Barrel
Yes, centrifugal barrel finishing knocks down layer lines and support witness marks on printed metal parts, on the surfaces the media can reach. Here is how to prepare the part, choose media, stage the cycles, and know when another process is the right call.
Read →
Case Study: Matching Hand-Polish Quality on Aerospace Parts, Repeatably
A Tier 2 aerospace shop doubted a barrel could match hand polishing. The isotropic finish came back even on every edge and bore, and it came back the same way every batch.
Read →
What Is Centrifugal Barrel Finishing?
The fastest way to deburr, radius, and polish metal parts in bulk, explained in plain English: the Ferris-wheel principle, the force, and why the finish is isotropic.
Read →